General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

BHT free,low monomer residues,low viscosity and high solid content at 48%~52%. They gives a good flowabitily when mixing with water. The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the ultra–high hardness flexible slabstock foams and flame lamination foams. 

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

 BHT free, low monomer residues, low viscosity and high solid content at 44.5%-48.5%, They gives a good flowabitily when mixing with water.The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the high hardness flexible slabstock foams and flame lamination foams.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

BHT-free, amine-free and highly reactive polyether with a molecular weight of 5000 can be used for producing highly resilient slabstock foams.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

BHT free,low monomer residues,low viscosity and high solid content at 48%~52%. They gives a good flowabitily when mixing with water. The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the ultra–high hardness flexible slabstock foams and flame lamination foams. 

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

 BHT free, low monomer residues, low viscosity and high solid content at 44.5%-48.5%, They gives a good flowabitily when mixing with water.The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the high hardness flexible slabstock foams and flame lamination foams.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

BHT-free, amine-free and highly reactive polyether with a molecular weight of 5000 can be used for producing highly resilient slabstock foams.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

BHT and amine-free low resilience polyether: mainly used in foams such as low resilience slabstock foams and molded foams, etc.

BHT and amine-free low resilience polyether: mainly used in foams such as low resilience slabstock foams and molded foams, etc.

Typical highly reactive, BHT and amine-free polyether with the molecular weight of 5000 is suitable for a wide range of applications; its mixture with POP can be used for producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels. It can also be used for producing the filling foam for automotive dashboards.

BHT and amine-free, high functionality, high molecular weight (8000) and highly reactive polyether is widely used for producing high resilience foams and high resilience molded foams.

BHT and amine-free, high functionality, high molecular weight (12000) and highly reactive polyether can be used for producing low-density and high resilience foams.

Typical highly reactive, BHT and amine-free polyether with the molecular weight of 6000 is suitable for a wide range of applications; its mixture with POP can be used for producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels. Compared with 330N, products made of 828 have better resilience, however, at the cost of compromised hardness.

Highly reactive polyether made with the help of new generation of catalyst, with 3 degrees of functionality and the molecular weight of 6000; compared with 828, 828P features low degree of unsaturation, low odour and low VOC, etc.

Highly reactive polyether made with the help of new generation of catalyst, with 3 degrees of functionality and the molecular weight of 7500. Compared with 828, 822P features low degree of unsaturation, low odour and low VOC, etc., and products made of 822P have better resilience and low compression set.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

High resilience foam opener polyether has moderate opening function and is suitable for various cold-curing molded foam systems.

High resilience foam opener polyether has strong opening function and is suitable for various cold-curing molded foam systems.

General polyether suitable for producing sponges used in bras.

General polyether suitable for producing sponges used in bras.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

BHT and amine-free highly reactive polyether with the molecular weight of 5000 can be used to produce various polyurethane shoe materials, effectively increasing the resilience of products.

BHT and amine-free highly reactive polyether with the molecular weight of 6000 can be used to produce various polyurethane shoe materials, effectively increasing the resilience of products.

BHT and amine-free highly reactive polyether with the molecular weight of 4000 features low degree of unsaturation, and can increase the breaking elongation of materials, speed up their curing process and shorten the mold releasing time.

BHT and amine-free, mainly used for producing paints, sealing agents, adhesives and elastomers, etc.

BHT and amine-free, mainly used for producing paints, sealing agents and adhesives.

BHT and amine-free, mainly used for producing paints, sealing agents, adhesives and elastomers, etc. 

BHT-free and amine-free polyether polyols.They are mainly used to manufacture coatings and cementing compound,etc.

Without BHT and amines.They are mainly used to manufacture coatings and cementing compound, etc.

BHT and amine-free, mainly used for producing paints, etc.

BHT and amine-free, low degree of unsaturation, general polyether; mainly used for producing paints, sealing agent, adhesives and elastomer, etc.

BHT-free and amine-free high reactivity polymer polyols with low monomer residues,which are used for the high resilience slabstock foams, molded resilience foams,integral skin foams and semi-rigid polyurethane foams, etc.

BHT and amine-free, highly reactive, low degree of unsaturation polyether can be used for producing polyurethane micro-hole elastomers, polyurethane paints, etc.  

BHT-free and amine-free high reactivity polyether polyols and widely applied. The products are characterized by low odor.The mixtures with polymer polyols are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels. They can also be prepared for foams applied to fill the dashboard.

BHT-free and amine-free high reactivity polyether polyols with the high functionality and molecular weight. They are used to manufacture high resilient slabstock foams and high resilient molded foams, etc.

BHT-free and amine-free high reactivity polyether polyols with the high functionality and high molecular weight. They are mainly used to manufacture low-density high resilience foams, etc.

BHT-free and amine-free high reactivity polyether polyols with high molecular weight. The products are characterized by low odor.They are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels.And they can also be prepared for foams applied to fill the dashboard.

BHT-free and amine-free high reactivity polyether polyols with the characteristics of low degree of unsaturation, low odor, low VOC etc. They are mainly used to manufacture low-density high resilience foams, etc.

BHT-free and amine-free high reactivity polyether polyols with the characteristics of low degree of unsaturation, low odor, low VOC etc. They are mainly used to manufacture low-density high resilience foams, etc.

General polyether without BHT. They are prepared for slabstock foams, mattress, furniture and packing materials and can be used to produce low, moderate and high density foams.

General polyether polyols without BHT and applied widely. They are prepared for slabstock foams, mattress, furniture and packing materials and can be used to produce low, moderate and high density foams. They are also especially fit for sponges used for flame lamination to improve tensile and tear strength.

BHT-free and widely applied. They are prepared for slabstock foams, waterproofing coatings, mattress, furniture and packing materials and can be used to produce moderate and high density foams.

General polyether polyols without BHT and widely used.The products are characterized by low water content and low potassium ion content.They are mainly used to manufacture polyurethane coatings, etc.

General polyether polyols without BHT and widely used. The products are characterized by low water content and low potassium ion content.They are mainly used to manufacture polyurethane adhesive and elastomers, etc.

General polyether polyols without BHT and widely used. They are characterized by the low degree of unsaturation and mainly used to manufacture coatings, adhesive, sealants and elastomers, etc.

BHT-free and amine-free polyether polyols.They are mainly used to manufacture coatings and cementing compound, etc.

BHT-free and amine-free polyether polyols. They are mainly used to manufacture coatings and cementing compound, etc.

General polyether polyols without BHT and amines.They are mainly used to manufacture polyurethane coatings, etc.

General polyether polyols without BHT and applied widely.They are characterized by the low unsaturation. The products are mainly prepared for polyurethane elastomers and binders, etc.

BHT-free, amine-free and low unsaturation high reactivity polyether polyols. They are mainly used to manufacture microcellular polyurethane elastomer and polyurethane coating, etc.

BHT-free and amine-free polyether polyols. The products are characterized by low viscosity, low color and environment friendly antioxidant system.They are mainly used to manufacture slow recovery foams and mold foams, etc.

Typical slow-recovery polyether polyols without BHT, amine and widely applied. The products are characterized by low viscosity, low color and environment friendly antioxidant system. They are mainly used for slow-recovery slabstock foams and moulded foams.

Used as original polyether polyols for ultra-soft foam and gas bearing slow resilience foam of MDI system.

Used as the opening agent of high resilient slabstock foams and high resilient molded foams. They can also be used as original polyether polyols for ultra-soft foam and gas bearing slow resilience foam of MDI system.

Used as original polyether polyols for super soft foam and low resilience foam of MDI system.

BHT-free and amine-free high reactivity polyether polyols with high molecular weight. The products are characterized by low odor.They are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels.And they can also be prepared for foams applied to fill the dashboard.

Used to prepare gas bearing slow resilience slabstock foam and molded foam of MDI system. They are more adequate with gas bearing compared with CHE-3601.And they can also used as original polyether polyols for ultra-soft foam.

Fundamental polyether for super soft foams and for low resilience foams of the MDI system, and polyether for inflated and low resilience forms can resist low temperature without getting tougher and maintain its comfortability.

Fundamental polyether for super soft foams and for low resilience foams of the MDI system, and polyether for inflated and low resilience forms can resist low temperature without getting tougher and maintain its comfortability.

BHT and amine-free highly reactive polyether with high molecular weight. Mainly used for producing low-density and high resilience foams, etc.

BHT-free and amines-free high reactivity polymer polyols characterized by low viscosity, low monomer residues and high solid content at 41%-45%. The products are used to manufacture flexible and semi-rigid polyurethane foams of high load or highmodulus.

 BHT-free and amines-free high reactivity polymer polyols characterized by low viscosity, low monomer residues and high solid content at 43%-50%. The products are used to manufacture flexible and semi-rigid polyurethane foams of high load or highmodulus.

BHT-free and amine-free.

 Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Without BHT and amines.They are mainly used to manufacture coatings and cementing compound, etc.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

BHT free,low monomer residues,low viscosity and high solid content at 48%~52%. They gives a good flowabitily when mixing with water. The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the ultra–high hardness flexible slabstock foams and flame lamination foams. 

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

 BHT free, low monomer residues, low viscosity and high solid content at 44.5%-48.5%, They gives a good flowabitily when mixing with water.The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the high hardness flexible slabstock foams and flame lamination foams.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

BHT-free, amine-free and highly reactive polyether with a molecular weight of 5000 can be used for producing highly resilient slabstock foams.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

BHT and amine-free low resilience polyether: mainly used in foams such as low resilience slabstock foams and molded foams, etc.

BHT and amine-free low resilience polyether: mainly used in foams such as low resilience slabstock foams and molded foams, etc.

Typical highly reactive, BHT and amine-free polyether with the molecular weight of 5000 is suitable for a wide range of applications; its mixture with POP can be used for producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels. It can also be used for producing the filling foam for automotive dashboards.

BHT and amine-free, high functionality, high molecular weight (8000) and highly reactive polyether is widely used for producing high resilience foams and high resilience molded foams.

BHT and amine-free, high functionality, high molecular weight (12000) and highly reactive polyether can be used for producing low-density and high resilience foams.

Typical highly reactive, BHT and amine-free polyether with the molecular weight of 6000 is suitable for a wide range of applications; its mixture with POP can be used for producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels. Compared with 330N, products made of 828 have better resilience, however, at the cost of compromised hardness.

Highly reactive polyether made with the help of new generation of catalyst, with 3 degrees of functionality and the molecular weight of 6000; compared with 828, 828P features low degree of unsaturation, low odour and low VOC, etc.

Highly reactive polyether made with the help of new generation of catalyst, with 3 degrees of functionality and the molecular weight of 7500. Compared with 828, 822P features low degree of unsaturation, low odour and low VOC, etc., and products made of 822P have better resilience and low compression set.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

High resilience foam opener polyether has moderate opening function and is suitable for various cold-curing molded foam systems.

High resilience foam opener polyether has strong opening function and is suitable for various cold-curing molded foam systems.

General polyether suitable for producing sponges used in bras.

General polyether suitable for producing sponges used in bras.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

BHT and amine-free highly reactive polyether with the molecular weight of 5000 can be used to produce various polyurethane shoe materials, effectively increasing the resilience of products.

BHT and amine-free highly reactive polyether with the molecular weight of 6000 can be used to produce various polyurethane shoe materials, effectively increasing the resilience of products.

BHT and amine-free highly reactive polyether with the molecular weight of 4000 features low degree of unsaturation, and can increase the breaking elongation of materials, speed up their curing process and shorten the mold releasing time.

BHT and amine-free, mainly used for producing paints, sealing agents, adhesives and elastomers, etc.

BHT and amine-free, mainly used for producing paints, sealing agents and adhesives.

BHT and amine-free, mainly used for producing paints, sealing agents, adhesives and elastomers, etc. 

BHT-free and amine-free polyether polyols.They are mainly used to manufacture coatings and cementing compound,etc.

Without BHT and amines.They are mainly used to manufacture coatings and cementing compound, etc.

BHT and amine-free, mainly used for producing paints, etc.

BHT and amine-free, low degree of unsaturation, general polyether; mainly used for producing paints, sealing agent, adhesives and elastomer, etc.

BHT-free and amine-free high reactivity polymer polyols with low monomer residues,which are used for the high resilience slabstock foams, molded resilience foams,integral skin foams and semi-rigid polyurethane foams, etc.

BHT and amine-free, highly reactive, low degree of unsaturation polyether can be used for producing polyurethane micro-hole elastomers, polyurethane paints, etc.  

BHT-free and amine-free high reactivity polyether polyols and widely applied. The products are characterized by low odor.The mixtures with polymer polyols are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels. They can also be prepared for foams applied to fill the dashboard.

BHT-free and amine-free high reactivity polyether polyols with the high functionality and molecular weight. They are used to manufacture high resilient slabstock foams and high resilient molded foams, etc.

BHT-free and amine-free high reactivity polyether polyols with the high functionality and high molecular weight. They are mainly used to manufacture low-density high resilience foams, etc.

BHT-free and amine-free high reactivity polyether polyols with high molecular weight. The products are characterized by low odor.They are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels.And they can also be prepared for foams applied to fill the dashboard.

BHT-free and amine-free high reactivity polyether polyols with the characteristics of low degree of unsaturation, low odor, low VOC etc. They are mainly used to manufacture low-density high resilience foams, etc.

BHT-free and amine-free high reactivity polyether polyols with the characteristics of low degree of unsaturation, low odor, low VOC etc. They are mainly used to manufacture low-density high resilience foams, etc.

General polyether without BHT. They are prepared for slabstock foams, mattress, furniture and packing materials and can be used to produce low, moderate and high density foams.

General polyether polyols without BHT and applied widely. They are prepared for slabstock foams, mattress, furniture and packing materials and can be used to produce low, moderate and high density foams. They are also especially fit for sponges used for flame lamination to improve tensile and tear strength.

BHT-free and widely applied. They are prepared for slabstock foams, waterproofing coatings, mattress, furniture and packing materials and can be used to produce moderate and high density foams.

General polyether polyols without BHT and widely used.The products are characterized by low water content and low potassium ion content.They are mainly used to manufacture polyurethane coatings, etc.

General polyether polyols without BHT and widely used. The products are characterized by low water content and low potassium ion content.They are mainly used to manufacture polyurethane adhesive and elastomers, etc.

General polyether polyols without BHT and widely used. They are characterized by the low degree of unsaturation and mainly used to manufacture coatings, adhesive, sealants and elastomers, etc.

BHT-free and amine-free polyether polyols.They are mainly used to manufacture coatings and cementing compound, etc.

BHT-free and amine-free polyether polyols. They are mainly used to manufacture coatings and cementing compound, etc.

General polyether polyols without BHT and amines.They are mainly used to manufacture polyurethane coatings, etc.

General polyether polyols without BHT and applied widely.They are characterized by the low unsaturation. The products are mainly prepared for polyurethane elastomers and binders, etc.

BHT-free, amine-free and low unsaturation high reactivity polyether polyols. They are mainly used to manufacture microcellular polyurethane elastomer and polyurethane coating, etc.

BHT-free and amine-free polyether polyols. The products are characterized by low viscosity, low color and environment friendly antioxidant system.They are mainly used to manufacture slow recovery foams and mold foams, etc.

Typical slow-recovery polyether polyols without BHT, amine and widely applied. The products are characterized by low viscosity, low color and environment friendly antioxidant system. They are mainly used for slow-recovery slabstock foams and moulded foams.

Used as original polyether polyols for ultra-soft foam and gas bearing slow resilience foam of MDI system.

Used as the opening agent of high resilient slabstock foams and high resilient molded foams. They can also be used as original polyether polyols for ultra-soft foam and gas bearing slow resilience foam of MDI system.

Used as original polyether polyols for super soft foam and low resilience foam of MDI system.

BHT-free and amine-free high reactivity polyether polyols with high molecular weight. The products are characterized by low odor.They are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels.And they can also be prepared for foams applied to fill the dashboard.

Used to prepare gas bearing slow resilience slabstock foam and molded foam of MDI system. They are more adequate with gas bearing compared with CHE-3601.And they can also used as original polyether polyols for ultra-soft foam.

Fundamental polyether for super soft foams and for low resilience foams of the MDI system, and polyether for inflated and low resilience forms can resist low temperature without getting tougher and maintain its comfortability.

Fundamental polyether for super soft foams and for low resilience foams of the MDI system, and polyether for inflated and low resilience forms can resist low temperature without getting tougher and maintain its comfortability.

BHT and amine-free highly reactive polyether with high molecular weight. Mainly used for producing low-density and high resilience foams, etc.

BHT-free and amines-free high reactivity polymer polyols characterized by low viscosity, low monomer residues and high solid content at 41%-45%. The products are used to manufacture flexible and semi-rigid polyurethane foams of high load or highmodulus.

 BHT-free and amines-free high reactivity polymer polyols characterized by low viscosity, low monomer residues and high solid content at 43%-50%. The products are used to manufacture flexible and semi-rigid polyurethane foams of high load or highmodulus.

BHT-free and amine-free.

 Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Without BHT and amines.They are mainly used to manufacture coatings and cementing compound, etc.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

BHT free,low monomer residues,low viscosity and high solid content at 48%~52%. They gives a good flowabitily when mixing with water. The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the ultra–high hardness flexible slabstock foams and flame lamination foams. 

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

 BHT free, low monomer residues, low viscosity and high solid content at 44.5%-48.5%, They gives a good flowabitily when mixing with water.The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the high hardness flexible slabstock foams and flame lamination foams.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

BHT-free, amine-free and highly reactive polyether with a molecular weight of 5000 can be used for producing highly resilient slabstock foams.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

BHT and amine-free low resilience polyether: mainly used in foams such as low resilience slabstock foams and molded foams, etc.

BHT and amine-free low resilience polyether: mainly used in foams such as low resilience slabstock foams and molded foams, etc.

Typical highly reactive, BHT and amine-free polyether with the molecular weight of 5000 is suitable for a wide range of applications; its mixture with POP can be used for producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels. It can also be used for producing the filling foam for automotive dashboards.

BHT and amine-free, high functionality, high molecular weight (8000) and highly reactive polyether is widely used for producing high resilience foams and high resilience molded foams.

BHT and amine-free, high functionality, high molecular weight (12000) and highly reactive polyether can be used for producing low-density and high resilience foams.

Typical highly reactive, BHT and amine-free polyether with the molecular weight of 6000 is suitable for a wide range of applications; its mixture with POP can be used for producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels. Compared with 330N, products made of 828 have better resilience, however, at the cost of compromised hardness.

Highly reactive polyether made with the help of new generation of catalyst, with 3 degrees of functionality and the molecular weight of 6000; compared with 828, 828P features low degree of unsaturation, low odour and low VOC, etc.

Highly reactive polyether made with the help of new generation of catalyst, with 3 degrees of functionality and the molecular weight of 7500. Compared with 828, 822P features low degree of unsaturation, low odour and low VOC, etc., and products made of 822P have better resilience and low compression set.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

High resilience foam opener polyether has moderate opening function and is suitable for various cold-curing molded foam systems.

High resilience foam opener polyether has strong opening function and is suitable for various cold-curing molded foam systems.

General polyether suitable for producing sponges used in bras.

General polyether suitable for producing sponges used in bras.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

BHT and amine-free highly reactive polyether with the molecular weight of 5000 can be used to produce various polyurethane shoe materials, effectively increasing the resilience of products.

BHT and amine-free highly reactive polyether with the molecular weight of 6000 can be used to produce various polyurethane shoe materials, effectively increasing the resilience of products.

BHT and amine-free highly reactive polyether with the molecular weight of 4000 features low degree of unsaturation, and can increase the breaking elongation of materials, speed up their curing process and shorten the mold releasing time.

BHT and amine-free, mainly used for producing paints, sealing agents, adhesives and elastomers, etc.

BHT and amine-free, mainly used for producing paints, sealing agents and adhesives.

BHT and amine-free, mainly used for producing paints, sealing agents, adhesives and elastomers, etc. 

BHT-free and amine-free polyether polyols.They are mainly used to manufacture coatings and cementing compound,etc.

Without BHT and amines.They are mainly used to manufacture coatings and cementing compound, etc.

BHT and amine-free, mainly used for producing paints, etc.

BHT and amine-free, low degree of unsaturation, general polyether; mainly used for producing paints, sealing agent, adhesives and elastomer, etc.

BHT-free and amine-free high reactivity polymer polyols with low monomer residues,which are used for the high resilience slabstock foams, molded resilience foams,integral skin foams and semi-rigid polyurethane foams, etc.

BHT and amine-free, highly reactive, low degree of unsaturation polyether can be used for producing polyurethane micro-hole elastomers, polyurethane paints, etc.  

BHT-free and amine-free high reactivity polyether polyols and widely applied. The products are characterized by low odor.The mixtures with polymer polyols are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels. They can also be prepared for foams applied to fill the dashboard.

BHT-free and amine-free high reactivity polyether polyols with the high functionality and molecular weight. They are used to manufacture high resilient slabstock foams and high resilient molded foams, etc.

BHT-free and amine-free high reactivity polyether polyols with the high functionality and high molecular weight. They are mainly used to manufacture low-density high resilience foams, etc.

BHT-free and amine-free high reactivity polyether polyols with high molecular weight. The products are characterized by low odor.They are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels.And they can also be prepared for foams applied to fill the dashboard.

BHT-free and amine-free high reactivity polyether polyols with the characteristics of low degree of unsaturation, low odor, low VOC etc. They are mainly used to manufacture low-density high resilience foams, etc.

BHT-free and amine-free high reactivity polyether polyols with the characteristics of low degree of unsaturation, low odor, low VOC etc. They are mainly used to manufacture low-density high resilience foams, etc.

General polyether without BHT. They are prepared for slabstock foams, mattress, furniture and packing materials and can be used to produce low, moderate and high density foams.

General polyether polyols without BHT and applied widely. They are prepared for slabstock foams, mattress, furniture and packing materials and can be used to produce low, moderate and high density foams. They are also especially fit for sponges used for flame lamination to improve tensile and tear strength.

BHT-free and widely applied. They are prepared for slabstock foams, waterproofing coatings, mattress, furniture and packing materials and can be used to produce moderate and high density foams.

General polyether polyols without BHT and widely used.The products are characterized by low water content and low potassium ion content.They are mainly used to manufacture polyurethane coatings, etc.

General polyether polyols without BHT and widely used. The products are characterized by low water content and low potassium ion content.They are mainly used to manufacture polyurethane adhesive and elastomers, etc.

General polyether polyols without BHT and widely used. They are characterized by the low degree of unsaturation and mainly used to manufacture coatings, adhesive, sealants and elastomers, etc.

BHT-free and amine-free polyether polyols.They are mainly used to manufacture coatings and cementing compound, etc.

BHT-free and amine-free polyether polyols. They are mainly used to manufacture coatings and cementing compound, etc.

General polyether polyols without BHT and amines.They are mainly used to manufacture polyurethane coatings, etc.

General polyether polyols without BHT and applied widely.They are characterized by the low unsaturation. The products are mainly prepared for polyurethane elastomers and binders, etc.

BHT-free, amine-free and low unsaturation high reactivity polyether polyols. They are mainly used to manufacture microcellular polyurethane elastomer and polyurethane coating, etc.

BHT-free and amine-free polyether polyols. The products are characterized by low viscosity, low color and environment friendly antioxidant system.They are mainly used to manufacture slow recovery foams and mold foams, etc.

Typical slow-recovery polyether polyols without BHT, amine and widely applied. The products are characterized by low viscosity, low color and environment friendly antioxidant system. They are mainly used for slow-recovery slabstock foams and moulded foams.

Used as original polyether polyols for ultra-soft foam and gas bearing slow resilience foam of MDI system.

Used as the opening agent of high resilient slabstock foams and high resilient molded foams. They can also be used as original polyether polyols for ultra-soft foam and gas bearing slow resilience foam of MDI system.

Used as original polyether polyols for super soft foam and low resilience foam of MDI system.

BHT-free and amine-free high reactivity polyether polyols with high molecular weight. The products are characterized by low odor.They are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels.And they can also be prepared for foams applied to fill the dashboard.

Used to prepare gas bearing slow resilience slabstock foam and molded foam of MDI system. They are more adequate with gas bearing compared with CHE-3601.And they can also used as original polyether polyols for ultra-soft foam.

Fundamental polyether for super soft foams and for low resilience foams of the MDI system, and polyether for inflated and low resilience forms can resist low temperature without getting tougher and maintain its comfortability.

Fundamental polyether for super soft foams and for low resilience foams of the MDI system, and polyether for inflated and low resilience forms can resist low temperature without getting tougher and maintain its comfortability.

BHT and amine-free highly reactive polyether with high molecular weight. Mainly used for producing low-density and high resilience foams, etc.

BHT-free and amines-free high reactivity polymer polyols characterized by low viscosity, low monomer residues and high solid content at 41%-45%. The products are used to manufacture flexible and semi-rigid polyurethane foams of high load or highmodulus.

 BHT-free and amines-free high reactivity polymer polyols characterized by low viscosity, low monomer residues and high solid content at 43%-50%. The products are used to manufacture flexible and semi-rigid polyurethane foams of high load or highmodulus.

BHT-free and amine-free.

 Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Without BHT and amines.They are mainly used to manufacture coatings and cementing compound, etc.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

BHT free,low monomer residues,low viscosity and high solid content at 48%~52%. They gives a good flowabitily when mixing with water. The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the ultra–high hardness flexible slabstock foams and flame lamination foams. 

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

General polyether, suitable for producing sponge used in bed mats, sofas and pillows, etc.

 BHT free, low monomer residues, low viscosity and high solid content at 44.5%-48.5%, They gives a good flowabitily when mixing with water.The foam made by the products has low density gradient and uniform and fine cell structure. The products are mainly used in the high hardness flexible slabstock foams and flame lamination foams.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

BHT-free, amine-free and highly reactive polyether with a molecular weight of 5000 can be used for producing highly resilient slabstock foams.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used for producing highly resilient slabstock foams, effectively increasing their hardness and making it easier to open holes on them.

BHT and amine-free low resilience polyether: mainly used in foams such as low resilience slabstock foams and molded foams, etc.

BHT and amine-free low resilience polyether: mainly used in foams such as low resilience slabstock foams and molded foams, etc.

Typical highly reactive, BHT and amine-free polyether with the molecular weight of 5000 is suitable for a wide range of applications; its mixture with POP can be used for producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels. It can also be used for producing the filling foam for automotive dashboards.

BHT and amine-free, high functionality, high molecular weight (8000) and highly reactive polyether is widely used for producing high resilience foams and high resilience molded foams.

BHT and amine-free, high functionality, high molecular weight (12000) and highly reactive polyether can be used for producing low-density and high resilience foams.

Typical highly reactive, BHT and amine-free polyether with the molecular weight of 6000 is suitable for a wide range of applications; its mixture with POP can be used for producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels. Compared with 330N, products made of 828 have better resilience, however, at the cost of compromised hardness.

Highly reactive polyether made with the help of new generation of catalyst, with 3 degrees of functionality and the molecular weight of 6000; compared with 828, 828P features low degree of unsaturation, low odour and low VOC, etc.

Highly reactive polyether made with the help of new generation of catalyst, with 3 degrees of functionality and the molecular weight of 7500. Compared with 828, 822P features low degree of unsaturation, low odour and low VOC, etc., and products made of 822P have better resilience and low compression set.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

High resilience foam opener polyether has moderate opening function and is suitable for various cold-curing molded foam systems.

High resilience foam opener polyether has strong opening function and is suitable for various cold-curing molded foam systems.

General polyether suitable for producing sponges used in bras.

General polyether suitable for producing sponges used in bras.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

BHT and amine-free highly reactive polyether with the molecular weight of 5000 can be used to produce various polyurethane shoe materials, effectively increasing the resilience of products.

BHT and amine-free highly reactive polyether with the molecular weight of 6000 can be used to produce various polyurethane shoe materials, effectively increasing the resilience of products.

BHT and amine-free highly reactive polyether with the molecular weight of 4000 features low degree of unsaturation, and can increase the breaking elongation of materials, speed up their curing process and shorten the mold releasing time.

BHT and amine-free, mainly used for producing paints, sealing agents, adhesives and elastomers, etc.

BHT and amine-free, mainly used for producing paints, sealing agents and adhesives.

BHT and amine-free, mainly used for producing paints, sealing agents, adhesives and elastomers, etc. 

BHT-free and amine-free polyether polyols.They are mainly used to manufacture coatings and cementing compound,etc.

Without BHT and amines.They are mainly used to manufacture coatings and cementing compound, etc.

BHT and amine-free, mainly used for producing paints, etc.

BHT and amine-free, low degree of unsaturation, general polyether; mainly used for producing paints, sealing agent, adhesives and elastomer, etc.

BHT-free and amine-free high reactivity polymer polyols with low monomer residues,which are used for the high resilience slabstock foams, molded resilience foams,integral skin foams and semi-rigid polyurethane foams, etc.

BHT and amine-free, highly reactive, low degree of unsaturation polyether can be used for producing polyurethane micro-hole elastomers, polyurethane paints, etc.  

BHT-free and amine-free high reactivity polyether polyols and widely applied. The products are characterized by low odor.The mixtures with polymer polyols are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels. They can also be prepared for foams applied to fill the dashboard.

BHT-free and amine-free high reactivity polyether polyols with the high functionality and molecular weight. They are used to manufacture high resilient slabstock foams and high resilient molded foams, etc.

BHT-free and amine-free high reactivity polyether polyols with the high functionality and high molecular weight. They are mainly used to manufacture low-density high resilience foams, etc.

BHT-free and amine-free high reactivity polyether polyols with high molecular weight. The products are characterized by low odor.They are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels.And they can also be prepared for foams applied to fill the dashboard.

BHT-free and amine-free high reactivity polyether polyols with the characteristics of low degree of unsaturation, low odor, low VOC etc. They are mainly used to manufacture low-density high resilience foams, etc.

BHT-free and amine-free high reactivity polyether polyols with the characteristics of low degree of unsaturation, low odor, low VOC etc. They are mainly used to manufacture low-density high resilience foams, etc.

General polyether without BHT. They are prepared for slabstock foams, mattress, furniture and packing materials and can be used to produce low, moderate and high density foams.

General polyether polyols without BHT and applied widely. They are prepared for slabstock foams, mattress, furniture and packing materials and can be used to produce low, moderate and high density foams. They are also especially fit for sponges used for flame lamination to improve tensile and tear strength.

BHT-free and widely applied. They are prepared for slabstock foams, waterproofing coatings, mattress, furniture and packing materials and can be used to produce moderate and high density foams.

General polyether polyols without BHT and widely used.The products are characterized by low water content and low potassium ion content.They are mainly used to manufacture polyurethane coatings, etc.

General polyether polyols without BHT and widely used. The products are characterized by low water content and low potassium ion content.They are mainly used to manufacture polyurethane adhesive and elastomers, etc.

General polyether polyols without BHT and widely used. They are characterized by the low degree of unsaturation and mainly used to manufacture coatings, adhesive, sealants and elastomers, etc.

BHT-free and amine-free polyether polyols.They are mainly used to manufacture coatings and cementing compound, etc.

BHT-free and amine-free polyether polyols. They are mainly used to manufacture coatings and cementing compound, etc.

General polyether polyols without BHT and amines.They are mainly used to manufacture polyurethane coatings, etc.

General polyether polyols without BHT and applied widely.They are characterized by the low unsaturation. The products are mainly prepared for polyurethane elastomers and binders, etc.

BHT-free, amine-free and low unsaturation high reactivity polyether polyols. They are mainly used to manufacture microcellular polyurethane elastomer and polyurethane coating, etc.

BHT-free and amine-free polyether polyols. The products are characterized by low viscosity, low color and environment friendly antioxidant system.They are mainly used to manufacture slow recovery foams and mold foams, etc.

Typical slow-recovery polyether polyols without BHT, amine and widely applied. The products are characterized by low viscosity, low color and environment friendly antioxidant system. They are mainly used for slow-recovery slabstock foams and moulded foams.

Used as original polyether polyols for ultra-soft foam and gas bearing slow resilience foam of MDI system.

Used as the opening agent of high resilient slabstock foams and high resilient molded foams. They can also be used as original polyether polyols for ultra-soft foam and gas bearing slow resilience foam of MDI system.

Used as original polyether polyols for super soft foam and low resilience foam of MDI system.

BHT-free and amine-free high reactivity polyether polyols with high molecular weight. The products are characterized by low odor.They are used to prepare high resilient and cold-curing foams for cushions of bicycle, motorcycle and car and steering wheels.And they can also be prepared for foams applied to fill the dashboard.

Used to prepare gas bearing slow resilience slabstock foam and molded foam of MDI system. They are more adequate with gas bearing compared with CHE-3601.And they can also used as original polyether polyols for ultra-soft foam.

Fundamental polyether for super soft foams and for low resilience foams of the MDI system, and polyether for inflated and low resilience forms can resist low temperature without getting tougher and maintain its comfortability.

Fundamental polyether for super soft foams and for low resilience foams of the MDI system, and polyether for inflated and low resilience forms can resist low temperature without getting tougher and maintain its comfortability.

BHT and amine-free highly reactive polyether with high molecular weight. Mainly used for producing low-density and high resilience foams, etc.

BHT-free and amines-free high reactivity polymer polyols characterized by low viscosity, low monomer residues and high solid content at 41%-45%. The products are used to manufacture flexible and semi-rigid polyurethane foams of high load or highmodulus.

 BHT-free and amines-free high reactivity polymer polyols characterized by low viscosity, low monomer residues and high solid content at 43%-50%. The products are used to manufacture flexible and semi-rigid polyurethane foams of high load or highmodulus.

BHT-free and amine-free.

 Low-viscosity graft polyether with high solid content ensures high load bearing capacity.

Highly reactive polyether polyol with low content of residual monomers, combined with highly reactive polyether, can be used producing high resilience cold-curing foams used in seat cushions of cars, motorcycles and bicycles, as well as steering wheels, and also for producing the filling foams for automotive dashboards, effectively increasing their hardness and making it easier to open holes on them.

Without BHT and amines.They are mainly used to manufacture coatings and cementing compound, etc.